Start Here
System requirements- YOU MUST MAKE YOUR PC SETTINGS MATCH THIS BEFORE TRYING TO INJECT:
If you are not sure how to change the settings below please locate your motherboard model Number using the guide below and input it into chat gbt and ask it how to change the respective setting for that motherboard.
Settings Required: IF YOU DO NOT DO THIS IT WILL NOT WORK
SVM [AMD] / VT-X [INTEL] (BIOS) enabled. Virtulization enabled 16GB RAM (or more). Hyper V disabled for AMD CPU only. Hyper V enabled for INTEL CPU only. Firmware in UEFI mode only for INTEL CPU. The system use GPT format disk only for INTEL CPU. Secure Boot disabled. Supported: INTEL + AMD, Windows 10-11 | 1909 - 25h2.
How to Find Your Motherboard Model Using MSINFO32 (Windows)
If you need to identify your motherboard model on Windows, the built-in System Information tool (MSINFO32) makes it quick and easy—no third-party software required.
Step-by-Step Instructions
Open the Run dialog
Press Windows Key + R on your keyboard.
Launch System Information
Type
msinfo32Press Enter
Locate System Summary
When the System Information window opens, make sure System Summary is selected in the left panel (this is selected by default).
Find the motherboard details
On the right side, look for the following entries:
BaseBoard Manufacturer
BaseBoard Product
BaseBoard Version
Identify your motherboard model
The BaseBoard Product field is your motherboard model.
The BaseBoard Manufacturer tells you the brand (ASUS, MSI, Gigabyte, ASRock, etc.).
Example
BaseBoard Manufacturer: ASUS
BaseBoard Product: ROG STRIX B550-F GAMING
BaseBoard Version: Rev 1.xx
Your motherboard model in this example would be ASUS ROG STRIX B550-F GAMING.
Notes & Troubleshooting
If any BaseBoard fields show “To be filled by O.E.M.”, your system may be a prebuilt PC or laptop. In that case:
Check the manufacturer’s support page using your system model, or
Use an alternative method like Command Prompt (wmic) or CPU-Z.
Last updated